tag:blogger.com,1999:blog-2843542351611056012.comments2023-12-26T19:00:12.980+01:00Alex's blogUnknownnoreply@blogger.comBlogger113125tag:blogger.com,1999:blog-2843542351611056012.post-1708523599785276482023-12-26T19:00:12.980+01:002023-12-26T19:00:12.980+01:00Hi,
würde das ganze auch auf einem Raspberry4 lau...Hi,<br /><br />würde das ganze auch auf einem Raspberry4 laufen?Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-87106544542000191992023-06-15T15:09:06.955+02:002023-06-15T15:09:06.955+02:00rtl_433 has rtl_tcp support built in now: https://...rtl_433 has rtl_tcp support built in now: https://github.com/merbanan/rtl_433/pull/894Brendan Taylornoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-65395392181681008342023-04-08T04:01:32.703+02:002023-04-08T04:01:32.703+02:00Well, this is one of the best technical documentat...Well, this is one of the best technical documentation I've seen on the web. Thank you a lot for taking the time to write all this.<br /><br />Now, I need a couple weeks to digest all that new stuff as I am new at experimenting with my NESDR Smart v5 dongle.PEOPL-2https://www.blogger.com/profile/04023408720612041452noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-46600130888047705202022-04-01T23:13:14.517+02:002022-04-01T23:13:14.517+02:00on your manpage .. it is not correct the exec.js f...on your manpage .. it is not correct the exec.js file for the new openwrt 21.x<br /><br />you are using there "0", which needs to be replaced to ":"<br />https://openwrt.org/docs/guide-user/perf_and_log/statistic.custom<br /><br />thx cu camelErwinhttps://www.blogger.com/profile/03474266750135467626noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-23024653552135807272022-01-30T21:58:31.588+01:002022-01-30T21:58:31.588+01:00Sometimes first reply to ping server not work, why...Sometimes first reply to ping server not work, why?Alberto34noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-66753311817804695752021-06-15T08:48:41.979+02:002021-06-15T08:48:41.979+02:00Hi Gerd,
I can't say why it doesn't work ...Hi Gerd,<br /><br />I can't say why it doesn't work if you just say it doesn't work. Basically '/' in the front of an executable means for bash 'look that executable in the current folder. You should use '|' to redirect output of one executable to another one. Make sure that gawk is installed and as the article say adjust the gnuplot terminal type to the installed gnuplot variant. alexhttps://www.blogger.com/profile/15068148570398507828noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-60838490764331977022021-06-14T16:16:00.107+02:002021-06-14T16:16:00.107+02:00Hallo Alex,
Mijn name is Ger from the Netherlands...Hallo Alex,<br /><br />Mijn name is Ger from the Netherlands.<br />I found an artikel you wrote in 2016 blog.<br />I no its old but for me intersting becausde of writing in shell and make graphs with that.<br />The only thing is, i cannot make it work. When i use as your easy example $ ifacestat.sh 'wlan0' | gnuplotwindow.sh 60 "0:" "wlan0"<br />, it wil not work.<br />When i use ./ifacestat.sh 'wlan0' | ./gnuplotwindow.sh 60 "0:" "wlan0" it wil not work<br />When i use ./ifacestat.sh 'wlan0' & gnuplotwindow.sh 60 "0:" "wlan0" it shows the data but no graph<br /><br />Can you explane how to let i work on the Raspberry Pi with the terminal or bash file?<br /><br />Many thanks in advans<br />Greetings Ger<br /> gershttps://www.blogger.com/profile/09945798414359854664noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-50809640954858929052021-05-31T12:21:14.363+02:002021-05-31T12:21:14.363+02:00Alex, thanks for your code...
please it is possib...Alex, thanks for your code...<br /><br />please it is possible to update the patch for auto_rx because the actually version is 1.53?<br /><br />Lutz<br /><br /> Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-3494212254105221872021-02-24T09:10:51.539+01:002021-02-24T09:10:51.539+01:00which lua version? jit used?which lua version? jit used?Marvelhttps://www.blogger.com/profile/17066429441411352207noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-38253808091102832272020-03-06T19:29:56.944+01:002020-03-06T19:29:56.944+01:00This script works great. I've tried nc, telnet...This script works great. I've tried nc, telnet and bash builtin tcp. I have two tips for others reading this and trying.<br /><br />1. If you are using the bash tcp code posted above, you can scrap the config file and redirect the output on your echos with '>&3' instead. Like so:<br /><br />echo -e "NICK ${nick}" >&3<br />echo -e "USER $nick +i * :$0" >&3<br />(sleep 1;echo -e "JOIN #${channel}" >&3) &<br /><br />2. Also as seen above, I noticed some servers was not ready to accept JOIN right away so I ran it in a subshell with a sleep before. The '&' character makes the commands run in the background while the script in the main shell continues as normal.Anonymoushttps://www.blogger.com/profile/10696483543360256521noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-18245287979368236652018-11-11T23:31:28.786+01:002018-11-11T23:31:28.786+01:00I got it working, however I had to adjust the scri...I got it working, however I had to adjust the script to read sensor id instead of channel. Luckily the id does not change on these Acurite 592TXR units when the batteries are swapped out. Thanks for the great instructions!Jasonhttps://www.blogger.com/profile/12147834619094742260noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-89817134877961938102018-11-11T12:48:14.110+01:002018-11-11T12:48:14.110+01:00you'd need to register the /mnt/sd/bin/collect...you'd need to register the /mnt/sd/bin/collectsensor.sh C on the LUCI configuration page and also you'd need to adjust the exec.lua script accordinglyalexhttps://www.blogger.com/profile/15068148570398507828noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-4594388249566709962018-11-11T08:52:18.581+01:002018-11-11T08:52:18.581+01:00I cheated on the sed issue and hard coded my broad...I cheated on the sed issue and hard coded my broadcast address. Fortunately there was nothing wrong with the awk command, it's just stripped of characters when viewed in process status.<br /><br />I feel I'm within a couple inches of the finish line, but not getting a LuCI page to be generated. I'm guessing that's because of the channel being a letter and/or because it's wrapped in quotes and not being handled correctly by the collectsensor.sh script.<br /><br />Sample output from the "rtl_433 -F json -R 40" command:<br />{"time" : "2018-11-11 07:21:45", "model" : "Acurite tower sensor", "id" : 5320, "channel" : "C", "temperature_C" : 20.600, "humidity" : 50, "battery" : 0, "status" : 68}Jasonhttps://www.blogger.com/profile/12147834619094742260noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-82785081839537787532018-11-11T02:56:22.261+01:002018-11-11T02:56:22.261+01:00Hi, I'm having trouble with your sensorbroadca...Hi, I'm having trouble with your sensorbroadcast script. Primarily with the sed and awk commands not working properly. Any chance you could add the files to your rtl-433-openwrt repo on GitHub? Thanks.Jasonhttps://www.blogger.com/profile/12147834619094742260noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-71889849707367481672018-07-26T06:26:30.818+02:002018-07-26T06:26:30.818+02:00How much memory is expected to be used by dnsmasq ...How much memory is expected to be used by dnsmasq if cache size is set to 500,000 it it 500,000x86 byte = 43MB ? . where can i find official docs regarding memory required per cache entry ?Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-73410436695949999542018-07-05T17:59:32.667+02:002018-07-05T17:59:32.667+02:00Thanks a lot! Works great.Thanks a lot! Works great.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-35726746763136504722018-03-20T18:18:39.071+01:002018-03-20T18:18:39.071+01:00I think that what you published made a great deal ...I think that what you published made a great deal of <br />sense. But, what about this? suppose you were to write a killer headline?<br />I mean, I don't wish to tell you how to run your website, but suppose you added <br />something that makes people want more? I mean "Javascript vs Perl vs Python vs Lua speed comparison" is <br />a little boring. You should look at Yahoo's front page and see <br />how they create article headlines to get people to open the <br />links. You might add a related video or a pic or two to grab people excited about <br />everything've got to say. In my opinion, it would <br />bring your posts a little bit more interesting.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-82074988688897764962018-03-04T22:14:29.407+01:002018-03-04T22:14:29.407+01:00Thanks for the logread i was puzzled that it was n...Thanks for the logread i was puzzled that it was nothing in /var/log/syslogAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-70055401998239465142018-02-20T14:37:56.496+01:002018-02-20T14:37:56.496+01:00Hi, " The "temperature" data type i...Hi, " The "temperature" data type is already registered so I don't have to register it myself."... I am getting data from .db file. how to mention datatype or how to register it ?<br /><br />Thanks in advance...Anonymoushttps://www.blogger.com/profile/03478454651393861691noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-35481825616549826082017-11-27T20:46:44.386+01:002017-11-27T20:46:44.386+01:00will this do?
timeout 15 rtlclient.sh -f 43392000...will this do?<br /><br />timeout 15 rtlclient.sh -f 433920000 -a 127.0.0.1 -p 1234 -s 250000 | rtl_433 -R 40 -F json -U -r /dev/stdinalexhttps://www.blogger.com/profile/15068148570398507828noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-12464474441706378112017-11-27T06:06:15.242+01:002017-11-27T06:06:15.242+01:00Do you have any suggestions on how to get the rtlc...Do you have any suggestions on how to get the rtlclient.sh to exit when using an execution time limit within rtl_433. The time limit is set using the -T option<br /><br />example: rtlclient.sh -f 433920000 -a 127.0.0.1 -p 1234 -s 250000 | rtl_433 -R 40 -F json -T 15 -U -r /dev/stdinCraighttps://www.blogger.com/profile/15431319947175949508noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-67628774003321841832017-05-05T16:56:50.212+02:002017-05-05T16:56:50.212+02:00Thank you!
On my new Manjaro Xfce installation pol...Thank you!<br />On my new Manjaro Xfce installation polkit-gnome is in another folder. If it isn't working, try to<br />replace<br />exec --no-startup-id /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 &<br />with<br />exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1&Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-83214754984686105532017-04-02T18:50:00.713+02:002017-04-02T18:50:00.713+02:00Thank you!!
Here is a modded version that worked f...Thank you!!<br />Here is a modded version that worked for me..<br /><br />$ cat volume.sh <br />#!/bin/bash<br /><br /># $0 - icon_name, $2 - volume, $3 - id<br />print_cmd()<br />{<br />cat </dev/null);id=${id:-0}<br />idn=$(python2 -c "$(print_cmd $icon $volume $id)")<br />(($idn != $id)) && echo "$idn" > "$id_file"<br />exit 0<br />Felipe Marinhonoreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-25482491163669060662016-12-04T23:28:11.941+01:002016-12-04T23:28:11.941+01:00Cool! In this sunday I'm trying to do the sam...Cool! In this sunday I'm trying to do the same thing you made here years agobrunohttps://www.blogger.com/profile/04683203114675575879noreply@blogger.comtag:blogger.com,1999:blog-2843542351611056012.post-13642728715322247052016-11-25T23:00:45.772+01:002016-11-25T23:00:45.772+01:00Could not get it to work out of the box on Mac usi...Could not get it to work out of the box on Mac using OpenGL 2.1; had shader compile errors. When fixed shaders to version 120, compiled without errors, but still wouldn't render the OpenGL.<br /><br />Author should update this example to use QOpenGLWindow. The example looks very worthwhile.Anonymousnoreply@blogger.com